Working with Fabrics: A Beginner’s Guide to Sew-On Hook & Loop
Are you a sewing or DIY enthusiast? Perhaps you’re just getting started with your sewing journey? Regardless of your crafting prowess, there’s one thing that is undeniable – the convenience and versatility of sewable hook and loop.
Sewable hook and loop, specifically sewable VELCROⓇ Brand hook and loop can be used in a range of projects, from fixing clothes to creating costumes. It is ideal to use with fabrics, which aren’t as compatible with adhesive alternatives.
If you’re planning on using sew-on hook and loop in your next project, then this guide is here to help. Keep reading as we discuss sew-on hook and loop in more detail, offering our top tips for using it.
Is Hand or Machine Sewing Best for Sew-On VELCROⓇ Brand Products?
As its name suggests, sew-on hook and loop is hook and loop that is attached to fabric by sewing it with a needle and thread. This can be done both by hand or using a sewing machine, although which is best is dependent on a number of factors, such as:
- Fabric type: The thinner/more delicate the fabric, the harder it will be to sew hook and loop on. It may be best to hand sew as extra care can be taken, as well as use a hook and loop that is especially sleek.
- Durability: If it’s important for you to have an especially durable fastening, then machine-sewing will give you a stronger hold than hand sewing might.
- Skill: If you aren’t familiar with using a sewing machine, then you may find it difficult to sew with hook and loop, so you might wish to consider hand-sewing as your first option.
Regardless of whether you are hand or machine sewing, be sure to use a thread that matches the colour of your fabric. As for the stitch to use, a straight stitch works best, ideally with a seam allowance of 2mm, or as close to the edge of the hook and loop strips as possible.
Top Tips for Sewing with Hook & Loop
Round the Edges
When using sewable VELCROⓇ Brand hook and loop tape, you will cut the tape to the size you require. Doing this, however, leaves sharp corners that can be prickly and uncomfortable if used in garments, as well as make the appearance of the hook and loop appear less seamless with the fabric it’s attached to.
In order to avoid this, then, you can simply cut the corners of the hook and loop tape so that they are more rounded. Just be sure to make sure you’re cutting the existing seam and not cutting into the hook or loop itself.
Consider Your Needle
If you’re hand sewing your hook and loop, then you’ll want to put more consideration into the type of needle that you use. You’ll want to use a needle that is strong enough to pierce through the hook and loop tape, which is quite sturdy.
Consider using a denim needle, as these tend to be a bit thicker and sturdier than standard needles. You might also want to use a thimble to help you push the needle through the hook and loop tape.
Use a Zipper Foot
Alternatively, if you decide to use a sewing machine, then you might want to consider using a zipper foot. These allow you more precision over where you place the needle, allowing you to sew as close to the edge as possible.
Buy Your Sew-On VELCROⓇ Brand Products Today
If you’re in need of sew-on VELCROⓇ Brand hook and loop products, then we’ve got you covered here at MPD Hook & Loop. Take a look at our selection of sew-on products online today, alternatively get in touch with us with any questions regarding our products.